Comments on: Massey Ferguson 35 23C Data Specifications And Torques http://vintagetractorengineer.com/2009/01/massey-ferguson-35-23c-data-specifications-and-torques/ Thu, 17 May 2012 22:26:21 +0000 http://wordpress.org/?v=2.9.1 hourly 1 By: Dan http://vintagetractorengineer.com/2009/01/massey-ferguson-35-23c-data-specifications-and-torques/comment-page-1/#comment-2957 Dan Wed, 11 Apr 2012 21:08:12 +0000 http://vintagetractorengineer.com/?p=198#comment-2957 Hi, I have just got a 35 (1958) 4cyliner 23c and undertaking a complete engine rebuild as it has dropped a value and I require a new combustion chamber, does anyone know where I could source one from? Also i need a new fuel bowl housing as the threads are dead but I can't seem to find a replacement as it's separate to the lift pump (fits on the fuel tank) and all the replacements are different. Any help would be great. Thanks in advance. Dan Hi, I have just got a 35 (1958) 4cyliner 23c and undertaking a complete engine rebuild as it has dropped a value and I require a new combustion chamber, does anyone know where I could source one from?
Also i need a new fuel bowl housing as the threads are dead but I can’t seem to find a replacement as it’s separate to the lift pump (fits on the fuel tank) and all the replacements are different. Any help would be great.
Thanks in advance.
Dan

]]> By: Larry http://vintagetractorengineer.com/2009/01/massey-ferguson-35-23c-data-specifications-and-torques/comment-page-1/#comment-2940 Larry Sun, 01 Apr 2012 16:42:27 +0000 http://vintagetractorengineer.com/?p=198#comment-2940 Have a Massey haris ferguson tract on the right side ba1236 or a b 1 and right beside it is another one 300508 and on the other side on the left there's a tag that says sc87752evr any info would be greatly appreciated thanks Have a Massey haris ferguson tract on the right side ba1236 or a b 1 and right beside it is another one 300508 and on the other side on the left there’s a tag that says sc87752evr any info would be greatly appreciated thanks

]]> By: Sean http://vintagetractorengineer.com/2009/01/massey-ferguson-35-23c-data-specifications-and-torques/comment-page-1/#comment-2926 Sean Tue, 13 Mar 2012 01:13:32 +0000 http://vintagetractorengineer.com/?p=198#comment-2926 Hello, I'm trying to find a radiator for my dads m35 1958 23c motor and I can only find radiators for later models. Any help would be appreciated. Thanks Sean Hello,
I’m trying to find a radiator for my dads m35 1958 23c motor and I can only find radiators for later models. Any help would be appreciated.

Thanks
Sean

]]> By: mark http://vintagetractorengineer.com/2009/01/massey-ferguson-35-23c-data-specifications-and-torques/comment-page-1/#comment-2849 mark Fri, 06 Jan 2012 20:13:17 +0000 http://vintagetractorengineer.com/?p=198#comment-2849 Hi Mike, Yes mine is based on the FE35 with the (23c) diesel engine. It is my first project as i am 14 and started on the engine at the start of the week, i just removed the cylinder head tonight after school and am going ahead with a full engine rebuild. I think mine was bought yellow form massey ferguson and sprayed blue by the council also it is a round winged model with the original massey ferguson bonnet. Mine seems to have the loader bracket bolts but i think the loader was removed some time age. Yes i need the wheel cylinder for mine on both sides. I have found a supplier but they are on exchange? so i though maybe i would get in touch soon and see if i could arrange a price for the wheel cylinder without exchange? i hope this sight helps and if you find out anything else about brakes please tell me here. Here is the site http://www.silverfoxtractorspares.com/brakesrear-axle--pto-114-c.asp thanks for the reply, regards Mark. Hi Mike, Yes mine is based on the FE35 with the (23c) diesel engine. It is my first project as i am 14 and started on the engine at the start of the week, i just removed the cylinder head tonight after school and am going ahead with a full engine rebuild. I think mine was bought yellow form massey ferguson and sprayed blue by the council also it is a round winged model with the original massey ferguson bonnet. Mine seems to have the loader bracket bolts but i think the loader was removed some time age. Yes i need the wheel cylinder for mine on both sides. I have found a supplier but they are on exchange? so i though maybe i would get in touch soon and see if i could arrange a price for the wheel cylinder without exchange? i hope this sight helps and if you find out anything else about brakes please tell me here. Here is the site http://www.silverfoxtractorspares.com/brakesrear-axle–pto-114-c.asp thanks for the reply, regards Mark.

]]> By: Mike http://vintagetractorengineer.com/2009/01/massey-ferguson-35-23c-data-specifications-and-torques/comment-page-1/#comment-2845 Mike Wed, 04 Jan 2012 13:38:55 +0000 http://vintagetractorengineer.com/?p=198#comment-2845 Hi Mark, i also have a Massey Ferguson 4 cyl diesel. i think it's based on the FE35, it is the standard motor company diesel engine (23c) and also has hydraulic and mechanical brakes. I'm not sure what model it is? 202,702, workbull?? It is an industrial model as it's yellow. it has the round wings like a 35 but has a cast flast fronted nose. it did have a front loader fitted but it was removed and sold before i managed to rescue the tractor. As you've probably guessed i too am having problems finding brake parts. i'm missing the master cylinder and one wheel cylinder!! Please let me know if you find a supplier for any brake parts. Regards....Mike. Hi Mark, i also have a Massey Ferguson 4 cyl diesel. i think it’s based on the FE35, it is the standard motor company diesel engine (23c) and also has hydraulic and mechanical brakes. I’m not sure what model it is? 202,702, workbull?? It is an industrial model as it’s yellow. it has the round wings like a 35 but has a cast flast fronted nose. it did have a front loader fitted but it was removed and sold before i managed to rescue the tractor. As you’ve probably guessed i too am having problems finding brake parts. i’m missing the master cylinder and one wheel cylinder!! Please let me know if you find a supplier for any brake parts. Regards….Mike.

]]>