Sir,
I have an mf 35 and just recently the lift will pick up and work for about 45 mi’s then it goes down and won’t work again until it cools off.
Any ideas on what the problem might be? Your help would be greatly appreciated.
Jean
//
//
Hi,
Obviosusly it is some kind of leak or inefficiency in […]
Here are the data, specifications, dimensions, tolerances and the main tightening torque settings for the 4 cylinder Standard 23C engine as fitted to the MF35. These specifications accompany the MF35 Engine Rebuild DVD, which details every aspect of rebuilding the 4 cylinder Standard Motor Company 23C diesel engine as fitted to these tractors.
Data Specifications
Cylinders 4
Bore […]
Please could you help me with the installed cylinder liner heights for my Ferguson FE35 23C engine. I have 3 liners 0.002? above and 1 liner 0.004? below. The liners are new and my cylinder block was cleaned with no sign of wear to the liner recesses.Would you also advise installing liners with a permanant […]
The steering wheel is held in place on the Massey Ferguson 35, Ferguson FE35 and Ferguson TO35 with a single nut and washer. However, after removing the nut and washer is is often hard to loosen the wheel.
The shaft that the steering wheel fastens to is tapered, so it is often necessary to use a […]
Filming of the Massey Ferguson 35 Hydraulics DVD has started. Normally it is just a case of removing the seat, but we’ve had to remove the RHS wheel and mudguard so that it has been possible to film the tractor.
The hydraulics on this tractor have been getting worse and then failed completely. The […]
Ferguson TO35 Restoration
By The Vintage Tractor Engineer
A reader has sent in these pictures of a badly fire damaged TO35. This tractor has the Standard 23C 4 cylinder diesel engine and we hope that the engine rebuild DVD will come in useful in the tractor’s restoration.
Vintagetractorengineer has a great deal of respect for anyone who is […]
My TO35 won’t turn over with starter button. I replaced solenoid but won’t activate starter. I can start tractor jumping from solenoid to starter cable and remove starter cable after starting to stop starter motor.
I am electrically ignorant….HELP???
Hi John,
I would say that it could be one of a few things that could be causing the […]
Hello,
The 3 point linkage and front loader on my 1957 4 cylinder diesel Mf 35 have stopped working, all happened out of the blue, just worked one day then not. I changed the oil which was quite milky, front loader went up once then no more. 3 point kind of tries to rise (judders) but […]
