Dear Sirs – I have a M/f 165 with an A4 212 Perkins engine – cylinder head gasket leaking causing pressure in cooling system & also oil in the water. Stripped down top of engine – had head pressure tested & checked for trueness – both ok – did the valves & all injectors […]
Having problems with oscillating valve cir clip. How do you get cir clip in position inside valve. Does the valve slide? My old girl is in the 400,000 series. Acquired her last year, finally getting around to
refurbishing her. She still goes, but how so got me beat – […]
Hi all,
I have a mf 35 4 cylinder engine rebuilt pistons liners rings little ends
valve seats recut new valves head skimed it used to start up on 3 cylinders then the 4th cylinder come in we have had the injectors and injector pump serviced now it takes up to 4 atemps to start even […]
I would always say that there is no point preparing and painting a tractor
if you need to go back at a later date and perform some mechanical repairs;
basically because all the good paintwork is often scratched and damaged when doing the repair work.
When a job such as an engine rebuild is been undertaken this is […]
I’m rebuilding my Fordson Dexta engine (diesel) and need some info on the cylinder liners. I’ve just removed 3 seized pistons and pressed out the cylinder liners. The question is should I use high temp loctite 620 on the new liners when pressing them in. The older liners presumably didnt use it and are a […]
First thing is probably to inspect drive belt and see if it is OK for tension and condition.
Check that dynamo and control box are connected correctly. The larger dynamo terminal must be connected to control box terminal ‘D’. The smaller dynamo terminal connects to control box terminal ‘F’. Check the earth connection to the control […]
Per at Soggers has recently had an enquiry about converting from a dynamo to an alternator on a FE35. If you haven’t allready had a look at Per’s website then Vintage Tractor Engineer would recommend it as an interesting read about his FE35 tractor.
Per Said:-
I’ve had an inquiry about converting from a Lucas dynamo to a […]
Farmingfriends – read what’s happening on our farm
Ferguson Enthusiasts of North America
Johnson family tractor pages – Ferguson TED20, Massey Ferguson 35 3 cylinder and David Brown 880. Lots of photos, implements and good reading.
Per’s FE35 Tractor Site
Tim’s TEF20 Blog – very detailed photos and descriptions.
