Want to check out our tractor maintenance videos? Click here to see what we've got!
Wiring diagrams for the electrical system on the Massey Ferguson 35 tractors (including Ferguson TO 35 and Ferguson FE35). The first diagram is for the carburettor engines and the second diagram is for the diesel engine variants. Diagrams include the colour-code information of the cables.
If you are finding it difficult to follow the wiring diagrams, then the process is shown in detail on the MF35 Engine Rebuild DVD. Click the link and watch the trailer to the DVD.
Just click the link – mf35-wiring-diagram001 – . The .pdf file is in high resolution in order to view the small print.
Or another good wiring diagram can be seen on Per’s Soggers site which is all about his FE35. Per’s is on a negative earth with twin batteries.
Comments….
1
john nelson says:December 6th, 2008 at 10:00 pm
My TO35 won’t turn over w/starter button. I replaced solenoid but won’t activate starter. I can start tractor jumping from solenoid to starter cable and remove starter cable after starting to stop starter motor??? I am electrical ignorant….HELP2
Vintage Tractor Engineer. says:December 10th, 2008 at 6:07 pm
Hi John,I would say that it could be one of a few things that could be causing the
problem.Try the safety isolator switch (just in front of steering box). Make sure the tractor is out of gear (R,1,2,3), join the wires together on this switch (white/blue wire to the white/red). If it then startes with the ignition switch then that is the problem
Next try the ignition switch to see if it is faulty.
Next thing sould be the whole wiring loom (or part of it).
Have a look at this page and the wiring diagram.
Hope that helps.
Steve, VTE
[ad#2-ad-banner]
I am a little confused by the serial number on a M F 35 Petrol /Tvo tractor i am about to buy.
The MF 35 tractor was registered in 1959 with a serial number of SKM 129063 registration number TVN 911.
I would have thought that the serial number should have been prefixed by the letter H.
Would anyone give their thoughts on this please .
It is interesting to note that the colours that came from my Tractor (MF835) have a different colour scheme I would be interested to know if it is original or done as some later date Colours are red,blue grey,yellow,brown. Of course it would not matter too much if one did change to any colour unless selling on this may cause confusion.
I just bought a loom for my 1963 massey ferguson 35 x tractor but the colours are different from tractor loom where can I buy a wiring diagram to match the new loom colours ?
Hello.All is clear.Thank you.Greetings from Switzerland
Do you have a diagram for the wiring system for a Massey 35 gas burner, that would have motor and dash instruments?
purchased 1952 Ferguson TED 20,wiring completly stripped out,Brought wiring harness
from Sparex very costly ,no colour coding with it and Sparex do not supply any diagrams
for it or have any for it,old saying ever been done ,you have now.
can any body please help on this one ,so when the day comes to start it its right
Bob
I have a massey 35 with 3 cyl. perkins diesel hard to start and when running the exhaust is so strong that it burns my lungs what do I need to do? I have not change injectors or the injector pump..please help…
require mf 35 3 cyl diesel 12 volt wiring diagram neg earth if possible please.
Hi, i have recently purchased a TE20 Gasoline , it is in a poor state of repair, i am in the process of restoring it to as near as possible to original as possible . he first part of the project is to replace the electrical wiring as it has have wires cut and replaced with the old wiring lect in place, if any one can assist me with a wiring diagram and information on where to obtain a workshop manual. i would greatly appreciate the help.