Diagram of the fuel system and components for Perkins 3A-152 engine as fitted to the Massey Ferguson 35 tractor. This is all covered in detail in the 3A.152 DVD.
//
//
(Click to enlarge)
This little Grey Fergie has had foot plates added, wheras originally it would have just had the foot pegs. The foot plates make it much easier to get onto the seat, are more comfortabe when driving the tractor and (in conjunction with the added side plates) make for better safety. The wings have been drilled […]
The grey Ferguson TEF 20 we have just bought is in fair condition. The wing skins have been replaced so there is no rot on them, the only thing is they have flexed slightly when they have been tightened down to the brackets which has slightly cracked the paintwork. The bonnett has had some filler […]
We have just purchased a ‘new’ Ferguson TEF 20 tractor, in need of restoration. The first job is to rebuild the engine.
The serial number is 509,339 so that dates it at 1956, and means it was one of the latter tractors to be produced (total production was 517,651). The agent’s plate is difficult to read, […]
Wiring diagrams for the electrical system on the Massey Ferguson 35 tractors (including Ferguson TO 35 and Ferguson FE35). The first diagram is for the carburettor engines and the second diagram is for the diesel engine variants. Diagrams include the colour-code information of the cables.
If you are finding it difficult to follow the wiring diagrams, […]
I have a FE35 and am busy redoing the motor as it was spewing oil. Its a Vaporising oil motor, at least I think so because the carb has a 1578 stamped on it. Is there any other way of identifying the actual motor? I also see the only difference would be the S.R. Jet […]
One of our readers (Don) has sent in some info about his 1958 TO35. Don’s father bought the tractor back in 1964 and in 1978 (11,000 hours) the engine was pulled down for a rebuild. The crankshaft and bearings were all still good after these engine hours, but one of the liners was broken and […]
stephen hibble wrote:
Hi hope you can help me,
I have just been given a massey fe 35 tractor my problem is the last owner started to rebuilt it but passed a way I have refitted the head but I am stummped with the push rods 6 are long, 2 are a bit shorter any hints of […]
