We have been asked where to find a manifold primer pump for a 1959 Massey Ferguson 35. The pump is no longer pumping fuel.
Unfortunately we can’t make any suggestions as to where to source this part, but it is probably just a seal which needs replacement and so would suggest stripping down the pump. It […]
Stuart is having trouble with the hydraulics on his tractor. Here is what he has to say…
I have a MF35 tractor. The hydraulic lift pump seems to be operating slow when using the hydraulics to lift the ram on my tilt trailer. I have been advised to check the strainer. I was given a photo […]
One of our readers, Nick, has sent in a query about his tractor. Nick is having problems sourcing the correct tractometer cable and is also trying to identify which model he has. Can anyone help?
Here’s what Nick has to say about his tractor…
Happy New Year All, My lovely wife bought me a MF35X with 9 […]
One of Vintage Tractor Engineer’s Australian DVD customers, forum member and much appreciated commentator on this website (it’s the tractor restoring public that make this website what it is!!) owns a grey gold FE35 and a red/grey Massey Ferguson 35.
Dave has some good information for us all, and says that the gold/grey FE35 had a […]
On 19th November 1957 it was announced that the Massey-Harris-Ferguson name was to be changed to Massey Ferguson. The result of this was that the gold and grey liveried FE35 was to change to the new Massey Ferguson colours of grey and red.
This promotional photo shows that although the livery changed […]
We have a customer who has a problem with the hydraulics on his Massey Ferguson 35 tractor. Joe has sent in a picture of his tractor, which looks absolutely superb.
The lift arms are dropping whenever he depresses the clutch pedal, here is what he says…
I enjoyed the MF 35 Hydraulics DVD. It is professionaly done […]
Last week we sent out a Massey Ferguson 35 Hydraulics DVD to Mr Alan Clark from Ontario Canada. He has made his own bracket to help flip over the hydraulic top cover, and has made such a good job of it Vintage Tractor Engineer thought it was worth showing the pictures here on the website.
After watching […]
Paul has been having trouble getting a pin into the flywheel of his tractor engine to locate 16 deg before top dead centre (TDC)…..
I’m currently working on a couple of 23c and trying to find the hole in the flywheel. I have, as per dvd, put a 1/4 in bar in the hole in the […]
