Hi all,
I have a mf 35 4 cylinder engine rebuilt pistons liners rings little ends
valve seats recut new valves head skimed it used to start up on 3 cylinders then the 4th cylinder come in we have had the injectors and injector pump serviced now it takes up to 4 atemps to start even […]
First thing is probably to inspect drive belt and see if it is OK for tension and condition.
Check that dynamo and control box are connected correctly. The larger dynamo terminal must be connected to control box terminal ‘D’. The smaller dynamo terminal connects to control box terminal ‘F’. Check the earth connection to the control […]
Hi,
Found the web site very useful some very good information here, but I can’t find the answer to my particular problem.
I have a MF35 fitted with a mill bucket front loader that we inherited with our small holding. I would like to ask two questions if I may;
The first is regarding the mill bucket, if […]
Hello,
I wandered if you could help me. I am lookinf for the piston protrusion height for a Standard 23C engine fitted to my Ferguson FE35 tractor. Also, do you know how many degrees before top dead centre before start of injection.
Many thanks, Jeffrey Samuelsen.
Hi Jeffrey,
Afraid we haven’t got a figure for the piston […]
Hi there,
I have contacted you in the past and your information was very helpful. I am having a problem with water in the oil and don’t know how to get it out of the hydraulics can you give me any ideas.
Thanks,
Brenton Bain
Hi Brenton,
Is it milky?
You will have to let the oil […]
Diagram of the fuel system and components for Perkins 3A-152 engine as fitted to the Massey Ferguson 35 tractor. This is all covered in detail in the 3A.152 DVD.
//
//
(Click to enlarge)
Wiring diagrams for the electrical system on the Massey Ferguson 35 tractors (including Ferguson TO 35 and Ferguson FE35). The first diagram is for the carburettor engines and the second diagram is for the diesel engine variants. Diagrams include the colour-code information of the cables.
If you are finding it difficult to follow the wiring diagrams, […]
I have a FE35 and am busy redoing the motor as it was spewing oil. Its a Vaporising oil motor, at least I think so because the carb has a 1578 stamped on it. Is there any other way of identifying the actual motor? I also see the only difference would be the S.R. Jet […]
